Dumps for Free Fortinet FCSS_NST_SE-7.4 Practice Exam Questions [Mar 18, 2025] 

FCSS_NST_SE-7.4 Dumps PDF And Certification Training

Fortinet FCSS_NST_SE-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing: This part of the exam examines the expertise of Fortinet network and security professionals, in routing enterprise traffic effectively.
Topic 2	System Troubleshooting: This part of the exam assesses the ability of Fortinet network and security professionals to diagnose and fix typical system-related problems within Fortinet solutions. It involves troubleshooting FortiGate-to-FortiGate Security Fabric issues, addressing automation stitch concerns, and detecting resource-related problems using integrated tools.
Topic 3	VPN: This section tests the knowledge of IT professionals, such as system engineers in diagnosing and resolving VPN-related issues. It emphasizes troubleshooting IPsec IKE versions 1 and 2 to ensure secure and reliable communication between networks or remote users.
Topic 4	Security Profiles: This segment of the exam tests the skills of IT professionals, such as network administrators in handling and troubleshooting security profile-related challenges.
Topic 5	Authentication: This section evaluates the proficiency of Fortinet network and security professionals in resolving both local and remote authentication issues.

 

NEW QUESTION # 14
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.

What two conclusions can you draw Itom the output? (Choose two.)

• A. The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.
• B. FSSO is using DC agent mode to detect logon events.
• C. FSSO is using agentless polling mode to detect logon events.
• D. The logon event can be seen on the collector agent installed on Windows.

Answer: A,C

NEW QUESTION # 15
Exhibit.

Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)

• A. The initiator provided remote as its IPsec peer ID.
• B. It shows a phase 2 negotiation.
• C. The local gateway IP address is 10.0.0.1.
• D. Perfect Forward Secrecy (PFS) is enabled in the configuration.

Answer: A,B

NEW QUESTION # 16
Refer to the exhibit, which shows the output o! the BGP database.

Which two statements are correct? (Choose two.)

• A. The advertised prefix of 10.20.30.0'24 was configured using the network command.
• B. The first four prefixes are being advertised using a legacy route advertisement.
• C. The output shows all prefixes advertised by all neighbors as well as the local router.
• D. The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.

Answer: A,C

NEW QUESTION # 17
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?

• A. FortiGate uses the SNI from the user's web browser.
• B. FortiGate uses the ZN information from the Subject field in the server certificate.
• C. FortiGate uses the first entry listed in the SAN field in the server certificate.
• D. FortiGate closes the connection because this represents an invalid SSL/TLS configuration.

Answer: C

NEW QUESTION # 18
Refer to the exhibit, which shows the output of get router info bgp summary.

Which two statements are true? (Choose two.)

• A. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
• B. The local FortiGate has received 18 packets from a BGP neighbor.
• C. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
• D. The TCP connection with BGP neighbor 100.64.2.254 was successful.

Answer: A,B

NEW QUESTION # 19
Exhibit.

Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)

• A. There are 98908 kB o! memory that will never be used.
• B. The user space has 708880 kB of physical memory that is not used by the system.
• C. The I/O cache, which has 641364 kB of memory allocated to it.
• D. The value indicated next to the inactive heading represents the currently unused cache page.

Answer: A,D

NEW QUESTION # 20
Which statement about IKEv2 is true?

• A. IKEv1and IKEv2 share the concept of phase1and phase2.
• B. IKEv1and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.
• C. Both IKEv1and IKEv2 share the feature of asymmetric authentication.
• D. IKEv1and IKEv2 use same TCP port but run on different UDP ports.

Answer: B

NEW QUESTION # 21
Which authentication option can you not configure under config user radius on FortiOS?

• A. mschap
• B. eap
• C. mschap2
• D. pap

Answer: B

NEW QUESTION # 22
Exhibit.

Refer to the exhibit, which contains a screenshot of some phase 1 settings.
The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:

However, the IKE real-time debug does not show any output. Why?

• A. The log-filter setting is incorrect. The VPN traffic does not match this filter.
• B. Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.
• C. The administrator must also run the command diagnose debug enable.
• D. The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.

Answer: C

NEW QUESTION # 23
Exhibit.

Refer to the exhibit, which shows a partial web fillet profile configuration.
Which action does FortiGate lake if a user attempts to access www. dropbox. com, which is categorized as File Sharing and Storage?

• A. FortiGate blocks the connection, based on the FortiGuard category based filter configuration.
• B. FortiGate blocks the connection as an invalid URL.
• C. FortiGate allows the connection, based on the URL Filter configuration.
• D. FortiGate exempts the connection, based on the Web Content Filter configuration.

Answer: A

NEW QUESTION # 24
In which two slates is a given session categorized as ephemeral? (Choose two.)

• A. A TCP session waiting for the SYN ACK
• B. A UOP session with packets sent and received
• C. A TCP session waiting for FIN ACK
• D. A UDP session with only one packet received

Answer: A,D

NEW QUESTION # 25
Refer to the exhibit, which shows the output ofa debug command.

Which two statements about the output are true? (Choose two.)

• A. The interlace is part of the OSPF backbone area.
• B. There are a total of five OSPF routers attached to the vorz4 network segment
• C. In the network connected to port4, two OSPF routers are down.
• D. One of the neighbors has a router ID of 0.0.0.4.

Answer: A,C

NEW QUESTION # 26
Which exchange lakes care of DoS protection in IKEv2?

• A. IKE_Req_INIT
• B. IKE_Auth
• C. Create_CHILD_SA
• D. IKE_SA_NIT

Answer: A

NEW QUESTION # 27
Refer to the exhibit.

Which three pieces of information does the diagnose sys top command provide? (Choose three.)

• A. The miglogd daemon is running on CPU core ID 0.
• B. The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.
• C. The diagnose sys top command has been running for 18 minutes.
• D. The cmdbsvr process is occupying 2.4% of the total user memory space.
• E. If the neweli daemon continues to be in the R state, it will need to be manually restarted.

Answer: A,C,D

NEW QUESTION # 28
What are two reasons you might see iprope_in_check() check failed, drop when using the debug flow?
(Choose two.)

• A. Trusted host list misconfiguration.
• B. Packet was dropped because of policy route misconfiguration.
• C. Packet was dropped because of traffic shaping.
• D. VIP or IP pool misconfiguration.

Answer: A,D

NEW QUESTION # 29
Which statement aboutprotocol options is true?

• A. Protocol options allow administrators to configure the Any setting for all enabled protocols, which provides the most efficient use of system resources.
• B. Protocol options allow administrators to configure a maximum number of sessions for each configured protocol.
• C. Protocol options give administrators a streamlined method to instruct FortiGate to block all sessions corresponding to disabled protocols.
• D. Protocol options allow administrators to configure which Layer 4 port numbers map to upper-layer protocols, such as HTTP, SMTP, FTP, and so on.

Answer: D

NEW QUESTION # 30
......

Check your preparation for Fortinet FCSS_NST_SE-7.4 On-Demand Exam: https://testking.braindumpsit.com/FCSS_NST_SE-7.4-latest-dumps.html